Black silicon carbide F030 is a good wear-resistance media as a layer aggregate for dredger mud pumps. The model of silicon carbide F030 conforms to the particle size distribution of the European standard FEPA F30. The basic particle size of  30mesh is 0.6mm. Silicon carbide is not a natural ore, but an abrasive product obtained through high-temperature smelting in a large resistance furnace. Black silicon carbide(cacbua silic)  SiC content is higher than 98.5%. It belongs to first grade carborundum.

Aerogel-reinforced composites are thermal insulation and fireproof materials with aerogel as aggregate. Lightweight thermal insulation material favorable for aerogel material. The mechanical strength, thermal conductivity, and dielectric adjustability of aerogel composites can be improved by adding black SiC ultrafine powder F1200.

Green silicon carbide 500 mesh -1500 mesh polishing powder is especially suitable for polishing Babbitt alloy shaft sleeves. It is an abrasive with high hardness and sharp abrasive particles. The effect of rapid removal can be achieved for relatively soft alloys.

Polyester sandpaper, also known as polyester sanding film. It is a special sandpaper with the base of deformable polyester film. Applications mostly for high precision, such as automotive paint polishing, precision mold crankshafts, semiconductors, aerospace, etc.

Green silicon carbide powder is a common wire-sawing material in the photovoltaic industry. In recent years, the photovoltaic industry has significantly shrunk, and wire sawing is mainly used for slicing silicon wafers in the semiconductor industry. Diamond wire made from SiC powder combined with steel wire and diamond powder has become the two main tools for chip sawing. The differences between the two wire sawing methods are:

In semiconductor production equipment, high-performance ceramic components are essential. Especially silicon carbide ceramics are important components in key equipment such as etching machines, lithography machines, ion implantation machines, etc. For example, grinding and polishing suction cups, photolithography suction cups, inspection suction cups, etching processes, and motion platforms all have the presence of silicon carbide ceramics. These silicon carbide ceramic components have good structural stability, thermal stability, wear resistance, corrosion resistance, and high dimensional accuracy. Silicon carbide powder, as the main raw material for producing silicon carbide ceramics, must also have good and stable properties. Among them,  black SiC powder 800# for porous silicon carbide ceramic suction cups is a typical application.