Green Silicon Carbide F36-F500 For SiC Abrasive tools
Green silicon carbide abrasive powder is a brittle & extreme hardness (Mohs hardness of 9.5) material. It is suitable for producing grinding wheels for processing hard and brittle material workpieces. GC F36-F500 are mostly used for Abrasive tools. For example, resin-bonded stone GC grinding wheels; Ceramic grinding wheels for bearing processing; Fiber wheels, wire drawing wheels, flexible grinding wheels, nylon grinding wheels, etc. used for polishing and polishing stone and marble.
The green silicon carbide grinding wheel has the following characteristics:
>>The abrasive particles are sharp and have high hardness, suitable for grinding hard & brittle materials such as hard alloys, quartz glass, optical glass, optical lenses, ceramics, alloys, carbon fibers, marble, granite, etc.
>>Green silicon carbide abrasives have high brittleness and are difficult to maintain edges and corners, making them unsuitable for processing materials with high toughness, such as stainless steel.
>>Good thermal conductivity, suitable for polishing workpieces that are prone to thermal variability, such as non-ferrous metals, synthetic plastics, etc.
>>Because green silicon carbide abrasives themselves are very sharp, the produced green silicon carbide grinding wheels can be used to produce and process products such as gemstones.
Common raw material models for green silicon carbide grinding wheels:
Resin bonded GC grinding wheel: F24, F36, F60, F80, F120, F150, F180, F220.
PVA flexible polishing grinding wheel: F80, F120, F220, F320, F360.
Silicon carbide non-woven polishing wheels: F60, F80, F120, F220, F240, F320,F360,F400, F500.
Ceramic grinding wheel, flat grinding wheel, cup grinding wheel: F24, F36, F46, F60, F80, F120.
Rubber grinding wheels for stone: F46, F60, F80, F120, F150, F180, F220, F240, F320,F360,F400, F500.
