High quality Black silicon carbide P500
Introduction of High quality Black silicon carbide P500
High quality Black silicon carbide P500 is a suspension-treated black SiC powder. It is of higher purity since it’s acid washing and water flow sieving process. The Black silicon carbide powder has a sharper granule than that of F grit powder. That shape make grains more easily to glue sand onto coated abrasive base such as cloth and paper and stick tight on those bases.
Properties of High quality Black silicon carbide P500:
Very clean with few impurities such as free carbon, etc.
High hardness, retaining hardness, and high wear resistance.
Excellent thermal shock resistance with high thermal conductivity and low linear thermal expansion.
Good particle distribution with narrow particle range.
Good ability to withstand the strongest alkalis and acids.
Particle size distribution of High quality Black silicon carbide P500:
| D10(um) | D50(um) | D90(um) | D97(um) | D(3,2)(um) | D(4,3)(um) | Span |
| 20.06 | 31.98 | 46.65 | 58.32 | 29.39 | 32.80 | 1.020 |
Chemical composition of High quality Black silicon carbide P500
| Grit size | P240-P360 | P400-P800 | P1000-P3000 | P4000-P5000 |
| SiC | Min. 99.2% | Min. 99.0% | Min. 98.5% | Min. 98.0% |
| SiO2 | Max. 0.5% | Max.0.6% | ||
| Fe2O3 | Max.0.1% | Max.0.2% | ||
| F.C | Max.0.2% | Max.0.3% | ||
Typical physical properties of High quality Black silicon carbide P500
| Hardness: | Mohs:9.2 |
| Melting Point: | dissociated at about 2300 °C |
| Maximum service temperature: | 1900℃ |
| Specific Gravity: | 3.2-3.45 g/cm3 |
| Bulk density(LPD): | 1.2-1.6 g/cm3(depends on the size) |
| Color: | Black |
| Particle shape: | Hexagonal |
| Modulus of Elasticity | 58-65×106 psi |
| Coefficient of Thermal Expansion | 3.9-4.5 x10-6/ ℃ |
| Thermal Conductivity | 71-130 W/MK |
Applications of High quality Black silicon carbide P500:
Sanding paper, sanding wheel
Fiber disc, nylon polishing wheel
Non-woven polishing wheel
Sanding block, sanding sheet, sanding sponge, etc.
Knife Grinder, whetstone, oilstone, grinding stone, honing, sharpening sticks, etc.
Wear a resistance layer on bakes, etc.
Available sizes of Black silicon carbide powder
| Grit Size | Coarsest particle | Coarse particle | Basic particle | Mixed particle | Total mesh residual | Fine particle | ||||
| 100% residual mesh | mesh | Weight max. | Residual mesh | Weight min. | Residual mesh | Weight min. | Residual mesh | Weight min. | Weight max. | |
| P16 | 8 | 12 | 3 | 14 | 20-32 | 14 16 | 66-84 | 14 16 18 | 96 | 4 |
| P20 | 12 | 16 | 7 | 18 | 34-50 | 18 20 | 80-92 | 18 20 25 | 96 | 4 |
| P24 | 14 | 18 | 1 | 20 | 10-18 | 20 25 | 53-70 | 20 25 30 | 92 | 8 |
| P30 | 16 | 20 | 1 | 25 | 10-18 | 25 30 | 53-70 | 25 30 35 | 92 | 8 |
| P36 | 18 | 25 | 1 | 30 | 10-18 | 30 35 | 53-70 | 30 35 40 | 92 | 8 |
| P40 | 25 | 35 | 7 | 40 | 34-50 | 40 45 | 80-92 | 40 45 50 | 96 | 4 |
| P50 | 30 | 40 | 3 | 45 | 20-32 | 45 50 | 66-84 | 45 50 60 | 96 | 4 |
| P60 | 35 | 45 | 1 | 50 | 10-18 | 50 60 | 53-70 | 50 60 70 | 92 | 8 |
| P80 | 45 | 60 | 3 | 70 | 20-32 | 70 80 | 66-84 | 70 80 100 | 96 | 4 |
| P100 | 50 | 70 | 1 | 80 | 10-18 | 80 100 | 53-70 | 80 100 120 | 92 | 8 |
| P120 | 70 | 100 | 7 | 120 | 34-50 | 120 140 | 80-92 | 120 140 170 | 96 | 4 |
| P150 | 80 | 120 | 3 | 140 | 20-32 | 140 170 | 66-84 | 140 170 200 | 96 | 4 |
| P180 | 100 | 140 | 2 | 170 | 10-20 | 170 200 | 50-84 | 170 200 230 | 90 | 10 |
| P220 | 120 | 170 | 2 | 200 | 10-20 | 200 230 | 50-84 | 200 230 270 | 90 | 10 |
| P-Grit size | D0（um） | D3(um) | D50(um) | D95(um) |
| P240 | Max. 110 | Max. 81.7 | 58.5±2.0 | Min. 44.5 |
| P280 | Max. 101 | Max. 74.0 | 52.2±2.0 | Min. 39.2 |
| P320 | Max. 94 | Max. 66.8 | 46.2±1.5 | Min. 34.2 |
| P360 | Max. 87 | Max. 60.3 | 40.5±1.5 | Min. 29.6 |
| P400 | Max. 81 | Max. 53.9 | 35.0±1.5 | Min. 25.2 |
| P500 | Max. 77 | Max. 48.3 | 30.2±1.5 | Min. 21.5 |
| P600 | Max. 72 | Max. 43.0 | 25.8±1.0 | Min. 18.0 |
| P800 | Max. 67 | Max. 38.1 | 21.8±1.0 | Min. 15.1 |
| P1000 | Max. 63 | Max. 33.7 | 18.3±1.0 | Min. 12.4 |
| P1200 | Max. 58 | Max. 29.7 | 15.3±1.0 | Min. 10.2 |
| P1500 | Max. 53 | Max. 22.4 | 12.6±1.0 | Min. 8.3 |
| P2000 | Max. 45 | Max. 19.3 | 10.3±0.8 | Min. 6.7 |
| P2500 | Max. 38 | Max. 14.0 | 8.4±0.5 | Min. 5.4 |
| P3000 | Max. 32 | Max. 12.0 | 6.7±0.5 | Min. 3.0 |
| P4000 | Max. 27 | Max. 11.0 | 5.5±0.5 | Min. 2.0 |
| P5000 | Max. 23 | Max. 8.0 | 4±0.5 | Min. 1.8 |
The production process of High quality Black silicon carbide ：
Product Qualification of High quality Black silicon carbide
ISO 9001:2015 Certificate
TUV certificate
Package of High quality Black silicon carbide
- 25 kgs/PVC Bag with plastic inner bag.
- 1MT /Jumbo Bag
- 25 kgs/PVC Bag,40Bags/Jumbo Bag
- 1 Metric Ton/Jumbo Bag/Pallet
- 25 kgs/paper bag,1MT/Pallet
- Other customized package are available
FAQ：
Q: Are you a manufacturer?
A: We are manufacture. We began to produce silicon carbide material since 1999.
Q: Is the carborundum powder from you made by air flow or water flow process?
A: Our carborundum powder finer than F230 are made from water flow process after acid washing. The powder get narrow particle distribution range.
Q: What grade of silicon carbide do you have?
A: Expect metallurgical black silicon carbide, the silicon carbide from us are all of A grade quality.
Q: How will you check silicon carbide quality before delivery?
A: We will check the chemical content, and cleanness of the SiC grain and powder. And inspect the gradation and bulk density of SiC grain and powder.
Q: Do you support third part quality tests?
A: Yes, we are open to get third part quality test before delivery.
Q: Are the silicon carbide material from you is reclaimed material?
A: No. We only produce A grade silicon carbide produced from high quality melted SiC blocks.
Q: Is there any restriction to export silicon carbide from China?
A: Yes, it need to provide export license to Chinese customs. We could provide it and make custom clearance in China.
Q: Are free samples available?
A: Yes, we provide free samples within 1 kg. The customer only needs to bear the logistic cost.
Q: What is the lead time for each order?
A: It depends on the quantity required. Generally, 5-10 days for FCL(20-25MT).
Q: What is your annual capacity?
A: Our capacity is 1800-2000MT per month, annually appr. 22000 MT.
Reviews
There are no reviews yet.