Green Silicon Carbide F1200 for SiC ceramic tube
Green Silicon Carbide F1200 for SiC ceramic tube
Green Silicon Carbide F1200 for SiC ceramic tube is produced at high temperatures in an electric resistance-type furnace with quarts sand and petroleum coke. It is a synthetic brittle carborundum with high thermal conductivity and high strength which gets no decrease in 1000℃( 7.5 times stronger than Alumina).
Green silicon carbide is characterized by extreme hardness (Mohs 9.5/2600 Knoop) which only ranks after CBN and B4C. Haixu Abrasives manufacturing high purity and high uniformity silicon carbide powder. After acid pickled and water wash process, the quality meets FEPA or JIS standards.
Compared with black silicon carbide, green silicon carbide has a higher hardness which is Mohs 9.5 than black one Mohs 9.2. The purity of green SiC(min 99%) is also higher than black SiC(97-98%), so it’s more suitable for high-level applications.
Typical physical properties of Green Silicon Carbide F1200 for SiC ceramic tube
| Mohs Hardness: | 9.5 |
| Vickers Hardness: | 3100-3400kg/mm2 |
| Specific Gravity: | 3.2g/cm3 |
| Bulk density(LPD): | 1.2-1.6 g/cm3 |
| Color: | Green |
| Particle shape: | Hexagonal |
| Melting Point: | Dissociated at about 2600 centigrade |
| Maximum service temperature: | 1900 centigrade |
| Friability | Friable |
| Thermal conductivity | 0.013 cal/cm2.sec (900°C) |
| Thermal expansion coefficient | 7-9 x10-6 /℃(0-1600°C) |
Chemical analysis of Green Silicon Carbide F1200 for SiC ceramic tube
| Chemical Content | F20-F220 | JIS240#-JIS10000# |
| SiC | Min 99% | Min 98.5% |
| SiO2 | Max 0.50% | Max 0.70% |
| F,Si | Max 0.20% | Max 0.40% |
| Fe2O3 | Max 0.10% | Max 0.15% |
| F.C | Max 0.20% | Max 0.30% |
| L.O.I | Max 0.05% | Max 0.09% |
Green Silicon Carbide F1200 for SiC ceramic tube particle size:
| Grit Size | D10(um) | D50(um) | D90(um) | D97(um) |
| F1200 | 2.236 | 3.771 | 6.147 | 7.486 |
Product Feature of Green Silicon Carbide F1200 for SiC ceramic tubeGreen silicon carbide JIS#3000
- Extremely high hardness (Mohs 9.5, Vickers 3100-3400kg/mm2) with high wear-resistance ability. The hardness of SiC decrease with the increase of temperature. But still, even at the temperature of 1200°C, the hardness of green SiC is about twice that of fused alumina.
- Excellent chemical resistance and oxidation resistance. When heated at high temperatures, silicon carbide only oxidizes on the surface, forming a silicon dioxide film. The film can protect the silicon carbide material from oxidation. As a result, even at 1600°C, green SiC can maintain stability to most strong acids and alkalis.
- High Toughness. The toughness of silicon carbide abrasive refers to the difficulty of breaking under the action of external force. Taking F46 grit as an example, the toughness of carborundum tested by the static pressure method is about 68-78%. Compared with fused alumina, the mechanical strength of silicon carbide is higher. F120 for example, the compressive strength of silicon carbide is 186KN/cm2, and the compressive strength of corundum abrasive is 100KN/cm2.
- Excellent thermal shock resistance with low thermal expansion coefficient. At a temperature of 25-1400 °C, the average thermal expansion coefficient of silicon carbide is 4.4×10-6/°C, while the thermal expansion coefficient of fused alumina is 7-8×10-6/°C.
- High-temperature resistance; high-temperature strength. The melting point of green silicon carbide is 2600 °C, and the maximum operating temperature can reach 1900 °C. Applying silicon carbide to the inner wall of the engine can increase the life of the engine.
- High purity. The green silicon carbide grain from us is milling from A grade green SiC block. Then sieve to high consistency particles.
Applications of Green Silicon Carbide F1200 for SiC ceramic tube
- Sintered ceramic plate.
- Silicon carbide ceramic wear resistance component
- Furnace furniture such as SiC tubes, rods, etc.
- Silicon carbide ceramic Amor.
- Self-bonding silicon carbide ceramic
- Ceramic heat sink.
- Honeycomb Filter ceramic.
- Silicon carbide ceramic valves, nozzles.
Specification of Green silicon carbide powder
| JIS Grit Size | D0(Micron) | D3(Micron) | D50(Micron) | D94(Micron) |
| #240 | ≤ 127 | ≤ 103 | 57.0±3.0 | ≥ 40 |
| #280 | ≤ 112 | ≤ 87 | 48.0±3.0 | ≥ 33 |
| #320 | ≤ 98 | ≤ 74 | 40.0±2.5 | ≥ 27 |
| #360 | ≤ 86 | ≤ 66 | 35.0±2.0 | ≥ 23 |
| #400 | ≤ 75 | ≤ 58 | 30.0±2.0 | ≥ 20 |
| #500 | ≤ 63 | ≤ 50 | 25.0±2.0 | ≥ 16 |
| #600 | ≤ 53 | ≤ 41 | 20.0±1.5 | ≥ 13 |
| #700 | ≤ 45 | ≤ 37 | 17.0±1.5 | ≥ 11 |
| #800 | ≤ 38 | ≤ 31 | 14.0±1.0 | ≥ 9.0 |
| #1000 | ≤ 32 | ≤ 27 | 11.5.±1.0 | ≥ 7.0 |
| #1200 | ≤ 27 | ≤ 23 | 9.5±0.8 | ≥ 5.5 |
| #1500 | ≤ 23 | ≤ 20 | 8.0±0.6 | ≥ 4.5 |
| #2000 | ≤ 19 | ≤ 17 | 6.7±0.6 | ≥ 4.0 |
| #2500 | ≤ 16 | ≤ 14 | 5.5±0.5 | ≥ 3.0 |
| #3000 | ≤ 13 | ≤ 11 | 4.0±0.5 | ≥ 2.0 |
| #4000 | ≤ 11 | ≤ 8.0 | 3.0±0.4 | ≥ 1.8 |
| #6000 | ≤ 8.0 | ≤ 5.0 | 2.0±0.4 | ≥ 0.8 |
| #8000 | ≤ 6.0 | ≤ 3.5 | 1.2±0.3 | ≥ 0.6 |
FEPA standard:
| Grit Size | D3(um) | D50(um) | D94（um) |
| F230 | <82 | 53.0±3.0 | >34 |
| F240 | <70 | 44.5±2.0 | >28 |
| F280 | <59 | 36.5±1.5 | >22 |
| F320 | <49 | 29.2±1.5 | >16.5 |
| F360 | <40 | 22.8±1.5 | >12 |
| F400 | <32 | 17.3±1.0 | >8 |
| F500 | <25 | 12.8±1.0 | >5 |
| F600 | <19 | 9.3±1.0 | >3 |
| F800 | <14 | 6.5±1.0 | >2 |
| F1000 | <10 | 4.5±0.8 | >1 |
| F1200 | <7 | 3.0±0.5 | >1(at 80%) |
| F1500 | <5 | 2.0±0.4 | >0.8(at 80%) |
| F2000 | <3.5 | 1.2±0.3 | >0.5(at 80%) |
Production details of Green silicon carbide:
Packing of Green silicon carbide
FAQ:
Q: What is the difference between green silicon carbide and black silicon carbide?
A: First of all, Green silicon carbide has a higher purity of SiC(99%), black silicon carbide SiC purity is min 98%. Secondly, green silicon carbide is harder than black silicon carbide.
Q: Is the green silicon carbide powder from you by airflow sieving or water sieving?
A: Our green silicon carbide powder is made by the water sieving process(suspension treated). So the particles are of high consistency.
Q: What are the HS code and CAS NO. of silicon carbide?
A: HS code is 2849200000. CAS NO. is 409-21-2.
Q: Is there any restriction to export silicon carbide material from China?
A: Yes, it has to get an export license to export. We will provide it to customs.
Q: How many kgs of free samples can we get?
A: We provide free samples of less than 1 kg. Clients have to bear the express cost and DGM certificate cost.
Q: How do you inspect products before delivery?
A: We will check items of chemical, density, particle size distribution, and packing before delivery. After delivery, we keep samples of each batch for 3 months.
Q: Do you demand MOQ?
A: MOQ is 1 bag, always goes 25kgs. The transportation cost will be higher than that of 1MT.
Latest News
Reviews
There are no reviews yet.