Sale!

F30 green carborundum abrasive grain

F30 green carborundum abrasive grain is suitable for silicon carbide abrasive wheels. Its hardness of it only ranks after diamond and B4C, and it is harder than black silicon carbide. So it is suitable for grinding a large range of hard materials such as titanium alloy, marble, carbide alloy, optical glasses, ceramics, etc.

$2,850.00$2,950.00 / MT

F30 green carborundum abrasive grain

  • Product introduction of F30 green carborundum abrasive grain

F30 green carborundum abrasive grain is suitable for silicon carbide abrasive wheels. Its hardness of it only ranks after diamond and B4C, and it is harder than black silicon carbide. So it is suitable for grinding a large range of hard materials such as titanium alloy, marble, carbide alloy, optical glasses, ceramics, etc.

Green Silicon Carbide is produced at high temperature in an electric resistance-type furnace with quarts of sand and petroleum coke. The SiC purity of green silicon carbide is up to 99%min. It is an artificial brittle SiC with high thermal conductivity and high strength which get no decrease at 1000 centigrade.

 

  • Typical physical properties of F30 green carborundum abrasive grain
Mohs Hardness:9.5
Vickers Hardness:3100-3400kg/mm2
Specific Gravity:3.2g/cm3
Bulk density(LPD):1.2-1.6 g/cm3
Color:Green
Particle shape:Hexagonal
Melting Point:Dissociated at about 2600 centigrade
Maximum service temperature:1900 centigrade
FriabilityFriable
Thermal conductivity0.013 cal/cm2.sec (900°C)
Thermal expansion coefficient7-9 x10-6 /℃(0-1600°C)
  • Chemical analysis of F30 green carborundum abrasive grain
TYPICAL CHEMICAL ANALYSIS
Chemical ContentF20-F220F230-F2000
SiCMin 99%Min 98.5%
SiO2Max 0.50%Max 0.70%
F,SiMax 0.20%Max 0.40%
Fe2O3Max 0.10%Max 0.15%
F.CMax 0.20%Max 0.30%
L.O.IMax 0.05%Max 0.09%

 

  • Product Feature of F30 green carborundum abrasive grain
  1. Extremely high hardness (Mohs 9.5, Vickers 3100-3400kg/mm2) with high wear-resistance ability. The hardness of SiC decrease with the increase in temperature. But still, even at the temperature of 1200°C, the hardness of green SiC is about twice that of fused alumina.
  2. Excellent chemical resistance and oxidation resistance. When heated at high temperatures, silicon carbide only oxidizes on the surface, forming a silicon dioxide film. The film can protect the silicon carbide material from oxidation. As a result, even at 1600°C, green SiC can maintain stability to most strong acids and alkalis.
  3. High Toughness. The toughness of silicon carbide abrasive refers to the difficulty of breaking under the action of external force. Taking F46 grit as an example, the toughness of carborundum tested by the static pressure method is about 68-78%. Compared with fused alumina, the mechanical strength of silicon carbide is higher. F120 for example, the compressive strength of silicon carbide is 186KN/cm2, and the compressive strength of corundum abrasive is 100KN/cm2.
  4. Excellent thermal shock resistance with low thermal expansion coefficient. At a temperature of 25-1400 °C, the average thermal expansion coefficient of silicon carbide is 4.4×10-6/°C, while the thermal expansion coefficient of fused alumina is 7-8×10-6/°C.
  5. High-temperature resistance; high-temperature strength. The melting point of green silicon carbide is 2600 °C, and the maximum operating temperature can reach 1900 °C. Applying silicon carbide to the inner wall of the engine can increase the life of the engine.
  6. High purity. The green silicon carbide grain from us is milling from A grade green SiC block. Then sieve to high consistency particles.
  • Applications of F30 green carborundum abrasive grain
    GC grinding wheel for StoneF46,F60,F80,F120,F150,F180,F220
    Cutting disc for marble/Glass/graphiteF36,F46
    Bonded Grinding WheelF46,F60,F80,F120,F150,F180,F220
    Polishing wheel, Sanding discF80,F120,F150,F180,F220,F240,F320,F360

    F400,F500,F600,F800,F1000,F1200

    Honing stone, whetstoneF800,F1000,F1200,F1500,F2000
    Diamond sanding discF500,F600,F800,F1000,F1200,F1500

     

  • Specification of F30 green carborundum abrasive grain
Grit1233 and 45Q5max,%
W1,umQ1,%W2,umQ2max,%W3,umQ3min,%W4,umQ3+Q4min,%W5,um
F84000028002023604520007017003
F103350023602020004517007014003
F122800020002017004514007011803
F142360017002014004511807010003
F16200001400201180451000708503
F2017000118020100045850657103
F24118008502571045600655003
F30100007102560045500654253
F3685006002550045425653553
F4071005003042540355653003
F4660004253035540300652503
F5450003553030040250652123
F6042503003025040212651803
F7035502502521240180651503
F8030002122518040150651253
F9025001802015040125651063
F1002120150201254010665903
F120180012520106409065753
F15015001061590407565633
F1801250901575*634053*
F2201060751563*534045*

 

FEPA Gritds50-value (μm)
F 23053.0 ± 3
F 24044.5 ± 2
F 28036.5 ± 1.5
F 32029.2 ± 1.5
F 36022.8 ± 1.5
F 40017.3 ± 1
F 50012.8 ± 1
F 6009.3 ± 1
F 8006.5 ± 1
F 10004.5 ± 0.8
F 12003.0 ± 0.5
F 15002.0 ± 0.4
F 20001.2 ± 0.3
  • Production details of F30 green carborundum abrasive grain

  • Packing:

 

  • FAQ

Q: What is the difference between green silicon carbide and black silicon carbide?

A: First of all, Green silicon carbide has a higher purity of SiC(99%), black silicon carbide SiC purity is min 98%. Secondly, green silicon carbide is harder than black silicon carbide.

 

Q: Is the green silicon carbide powder from you by airflow sieving or water sieving?

A: Our green silicon carbide powder is made by the water sieving process. So the particles are of high consistency.

 

Q: What are the HS code and CAS NO. of silicon carbide?

A: HS code is 2849200000. CAS NO. is 409-21-2.

 

Q: Is there any restriction to export silicon carbide material from China?

A: Yes, it has to get an export license to export. We will provide it to customs.

 

Q: How many kgs of free samples can we get?

A: We provide free samples of less than 1 kgs. Clients have to bear the express cost and DGM certificate cost.

 

Q: How do you inspect products before delivery?

A: We will check items of chemical, density, particle size distribution, and packing before delivery. After delivery, we keep samples of each batch for 3 months.

 

Q: Do you demand MOQ?

A: MOQ is 1 bag, always goes 25kgs. The transportation cost will be higher than that of 1MT.

 

  • Latest News

Green silicon carbide 500# for polishing glass ball

Reviews

There are no reviews yet.

Be the first to review “F30 green carborundum abrasive grain”

Your email address will not be published. Required fields are marked *

PDF-LOGO-100-.png

TDS not uploaded

PDF-LOGO-100-.png

MSDS not uploaded

Please enter correct URL of your document.

Scroll to Top