Black SiC micron is a kind of silicon carbide powder with high SiC purity and narrow particle size range. The grit size of Black silicon carbide micron is from P240#-P5000#.
It is a wear-resistant and grinding material with an average particle size of 7.8-9.2 microns at the fine powder level. Black SiC characteristics and uses include:
Black silicon carbide Powder is a pure artificial SiC abrasive powder. It featured excellent hardness, thermal conductivity and effective grinding. Marble is a tough material to grind. The Black SiC powder is just for this task.
The wear-resistant powder in PTFE paint usually uses green silicon carbide micro powder because green silicon carbide has high hardness and wear resistance. It is suitable for improving the wear resistance of coatings. It is commonly for cooking tools, pharmaceutical reaction containers, chemical equipment, etc. In contrast, black silicon carbide usually has slightly lower hardness and is not as wear-resistant as green silicon carbide. However, in areas where product precision is not high, such as the building materials industry, customers also partially replace green silicon carbide with Black Silicon Carbide Grit #360 Mesh.
Black silicon carbide F030 is a good wear-resistance media as a layer aggregate for dredger mud pumps. The model of silicon carbide F030 conforms to the particle size distribution of the European standard FEPA F30. The basic particle size of 30mesh is 0.6mm. Silicon carbide is not a natural ore, but an abrasive product obtained through high-temperature smelting in a large resistance furnace. Black silicon carbide(cacbua silic) SiC content is higher than 98.5%. It belongs to first grade carborundum.
Aerogel-reinforced composites are thermal insulation and fireproof materials with aerogel as aggregate. Lightweight thermal insulation material favorable for aerogel material. The mechanical strength, thermal conductivity, and dielectric adjustability of aerogel composites can be improved by adding black SiC ultrafine powder F1200.
Green silicon carbide 500 mesh -1500 mesh polishing powder is especially suitable for polishing Babbitt alloy shaft sleeves. It is an abrasive with high hardness and sharp abrasive particles. The effect of rapid removal can be achieved for relatively soft alloys.
