During the wafer cutting process, 99.9% SiC powder 6-7um has multiple advantages compared to normal 98% SiC powder.

Green SiC powder 10um-12um is an excellent wear-resistant fillers in non stick pan coatings. It not only has wear-resistant properties, but also has chemical stability, high temperature resistance, and high temperature oxidation resistance. However, not all green SiC micron powder can fulfill this responsibility.

SiC powder (Silicon carbide) has great potential as an electrode material for lithium batteries, mainly reflected in the following aspects:

The main materials of precut board are resin binder and GC abrasive micro grit. The GC grit range from 320 mesh to 4000 mesh. By adjusting the particle size of the green silicon carbide abrasive, get different fineness of precut board. This product has high requirements for the main material GC abrasive powder. Especially the particle size should be as uniform, consistent, and delicate as possible.

The main formulas for UV curable coatings are oligomers, diluents, photoinitiators, and functional fillers.Silicon carbide micron powder 5um is an excellent functional fillers powder. The main functions and functions adding SiC powder are as follows:

During the smelting and crushing process of silicon carbide, it is inevitable to produce graphite electrode residues, raw material residues, free carbon, free silicon and other impurities. Therefore, these impurities need to be removed in the subsequent process. 

There are several methods to remove impurities from Silicon carbide powder: